Panana 5-Tier Steel and MDF Garage Shelving Unit

$39.57

This listed Panana shelving unit has five adjustable tiers, a boltless steel frame, 4 mm MDF shelf panels and rubber feet. The stated size is 150 × 70 × 30 cm, with a claimed 175 kg capacity per shelf. Confirm specifications before use.

The Panana 5-Tier Racking Shelf is listed as a freestanding storage rack for garages, workshops, sheds, offices, kitchens and similar areas. The supplied listing describes a silver steel frame with MDF shelf panels, adjustable levels and boltless assembly. ToolMaster has not independently verified these details, the load claim or the rack’s stability.

Overview

The listed unit measures 150 × 70 × 30 cm, or approximately 59 × 27.5 × 11.8 inches. It is presented as a five-level shelving system for organizing tools, supplies, containers, books, clothing and other stored items. The frame is described as steel with a powder-coated finish, while the shelf inserts are identified as cut-to-size 4 mm MDF boards.

Listed features

Five tiers

Multiple shelf levels are intended to use vertical storage space.

Adjustable shelves

The listing says shelf positions can be changed to suit different items.

Boltless construction

The rack is described as assembling without bolts, using a rubber mallet or hammer.

Claimed capacity

The source states up to 175 kg per shelf. Confirm the conditions and limits before loading.

The listing also mentions galvanized steel shelving supports, rubber feet described as nonslip, and a powder-coated frame. These are listing claims rather than ToolMaster-verified specifications.

Who may find it useful

This format may suit people sorting hand tools, boxed supplies, pantry items, paint containers or household storage in a garage, shed, utility room, workshop or office. Its narrow 30 cm listed depth may help where floor space is limited, but the available footprint and clearances should be checked against the intended location.

What to check before choosing

  • Confirm the exact assembled dimensions and whether the selected version is 150 × 70 × 30 cm.
  • Verify the 175 kg-per-shelf figure, including whether it applies evenly distributed loads and which shelf position it covers.
  • Check the MDF panel thickness, moisture suitability and resistance to spills or damp storage areas.
  • Review the assembly instructions, required tools, shelf-adjustment method and whether a mallet or hammer is recommended.
  • Confirm what is included, including shelf panels, feet and any bracing or anchoring hardware.

Safety and use considerations

Do not treat the stated shelf capacity as a universal safe working limit until it has been confirmed from current documentation. Load shelves evenly, keep heavier items low, and inspect the frame, shelf panels and connections after assembly. Place the rack on a firm, level surface and avoid climbing, standing or sitting on it. If the rack could be reached by children or exposed to tipping forces, check whether suitable anchoring is required and available.

Protect the MDF panels from water and prolonged dampness unless the current instructions specifically allow such use. Keep stored materials within the shelf edges and leave enough clearance to access items safely.

What remains unclear

The supplied text does not establish the rack’s maximum overall load, the tested basis for the shelf-capacity statement, the exact steel gauge, the finish’s verified corrosion performance, the included hardware, or whether the unit is intended to be anchored. It also lists several sizes and colors, so the current seller or manufacturer page should be checked to confirm the exact configuration.

A practical conclusion

This rack may be a useful vertical-storage option if its listed dimensions, adjustable layout and claimed capacity match your needs. Its MDF shelves and freestanding design deserve particular attention in damp areas or locations where tipping is possible. Details in this guide are based on the supplied listing and were not independently verified by ToolMaster.

Frequently asked questions

How many shelves does it have?
The listing identifies it as a five-tier unit.

What are the listed dimensions?
The specified version is listed as 150 × 70 × 30 cm, or about 59 × 27.5 × 11.8 inches.

Are the shelves adjustable?
The source says the shelf levels can be adjusted, but the adjustment system should be confirmed.

What is the stated shelf capacity?
The listing claims up to 175 kg per shelf. Confirm the applicable loading conditions before use.

Reviews

There are no reviews yet.

Be the first to review “Panana 5-Tier Steel and MDF Garage Shelving Unit”

Your email address will not be published. Required fields are marked *

Shopping Cart